ASME SA312 TP321 Seamless tubes exporter

 

ASME SA312 Stainless seamless tube, Stainless steel welded pipes ASME SA312 TP321 pdf,ASME SA312 TP321 Seamless pipes,Stainless steel Seamless pipes SA312 TP321,ASME SA312 TP321 Stainless seamless tubes.

 

Keywords:
SA312 TP321 Stainless Seamless pipes, SA312 TP321 Stainless seamless tube, Stainless steel Seamless pipes ASME SA312 TP321, Stainless steel Seamless pipes TP321 pipe price,

 

SA312 TP321 Seamless Specification: ASME SA312 specification covers seamless pipe and welded pipe for austenitic stainless steel. These high performance austenitic stainless steels have a fully austenitic microstructure in the quench annealed condition.

ASME SA312 TP321 Seamless tubes exporter
ASME SA312 TP321 Seamless tubes exporter

 

We produce ASME SA312 TP321 Seamless tube from China. The wall thickness from 0.8MM to 60MM. We export ASME SA312 TP321 Seamless pipes and supply in 20days.

 

Ryin Stainless stock a wide range of industry standard sizes of ASME SA312 Seamless Stainless-Steel Pipes. all quality parameters checked by experienced and good knowledge staff.

 

 

ASME TP321 Seamless tube production range: ASME SA312 pipe dimensions


OD10 to 2500mm, Thick:0.8mm-60mm, Length 500mm to 12000mm

 

Adopt standard: ASME SA312

 

 

SA312 TP321 Seamless tube Chemical Composition

 

Grade UNS Composition, %
Design C Mn P S Si
SA312 TP321 S32100 0.08 2.0 0.045 0.030 1
Cr Ni Ti Mo N
17-19 9-12 0.1

 

 

SA312 TP321 Seamless tube Tensile Requirements

Grade UNS
Designation
Tensile Strength, Min. ksi [MPa] Yield strength, min ksi [MPa] Elongation in 2 in., min, %
SA312 TP321 S32100 75 [515] 30 [235] 35

 

 

SA312 TP321 Seamless tube marking:

  1. Nominal Pipe Size (Nominal Bore)
  2. Schedule (Wall Thickness)
  3. Specification
  4. Material Grade
  5. Method of Manufacture (Seamless or Welded)
  6. Heat Number
  7. Manufacturers Name or Symbol

SA312 TP321 Permitted Variations in Wall Thickness

In addition to the implicit limitation of wall thickness for seamless pipe imposed by the limitation on weight in Specification A999/A999M, the wall thickness for seamless and welded pipe at any point shall be within the tolerances specified in ASME SA312 Table, except that for welded pipe the weld area shall not be limited by the “Over” tolerance.

The wall thickness and outside diameter for inspection for compliance with this requirement for pipe ordered by NPS and schedule number is shown in Table X1.1 at ASME SA312

 

SA312 TP321 Seamless tube Referenced Documents

ASTM Standards:

A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

A370 Test Methods and Definitions for Mechanical Testing of Steel Products

A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

A999/A999M Specification for General Requirements for Alloy and Stainless Steel Pipe

A1016/A1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

E112 Test Methods for Determining Average Grain Size

E381 Method of Microteach Testing Steel Bars, Billets,1 Blooms, and Forgings

E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

ANSI Standards:

B1.20.1 Pipe Threads, General Purpose

B36.10 Welded and Seamless Wrought Steel Pipe

B36.19 Stainless Steel Pipe

 

For us quality always stands first, and we would provide 100% free replacement to our customer. At the same time, we also strive to ensure that our quality for cold drawn stainless steel pipes and tubes is the best in the industry. Our continuous focus on quality, price and service has helped us win many orders from China and overseas.

 

Ryin Stainless factory welcome you to contact us for best prices for ASME SA312 TP321 stainless seamless  steel pipes and tubes.

 

 

 

ASME SA312 TP321 Seamless tubes exporter

You May Also Like