ASME SA213 TP347 Seamless heat exchanger tubes manufacturer

We are ASME SA213 TP347 seamless tubes supplier, ASME SA213 TP 347 heat exchanger tubes factory, SA213 Grade 347 stocklist and SA213 TP347 Stainless exporter.

Relate keywords: SA213 TP347 alloy steel tubes, SA213 TP347 austenitic stainless steel,SA213 TP347 boiler tubes,SA213 TP347 ferritic stainless steel,SA213 TP347 heat exchanger tubes,SA213 TP347 high-temperatureapplications,SA213 TP347 seamless steel tubes,SA213 TP347 steel tubes,SA213 TP347 super heater tubes,SA213 TP347 temperature service applications-high.


ASME SA213 TP347 specification: This Standard Specification are for Seamless Ferritic and Austenitic Alloy-Steel Boiler Superheater and Heat-Exchanger Tubes.


This specification covers seamless ferritic and austenitic steel boiler, superheaterand heat-exchanger tubes. The Mainly Grade are TP201 TP202 XM19 TP309S TP309SL TO304H TP309SN TP309SLN TP309S TP309H TP310S, TP310H TP316,TP316L, TP316H, TP316TI, TP316N,TP316LN, TP317, TP317L, TP3221,TP321H, TP347 TP347H, TP348, TP348H andTP444.

Ryin Stainless factory is specialized in suppling welded pipe and seamless stainless pipes. All of SA213 TP347 tubes are made by the seamless process and are either hot finished or cold finished as specified. Heat treatment shall be carried out separately and in addition to heating for hot forming.
All of austenitic stainless tubes shall be furnished in the heat treatment condition and shall be heat treated in accordance with the requirement of SA213 Standards.

SA213 TP347 seamless tubes production range:

Thickness: 0.5mm to 50mm
OD:10mm to 2500mm


SA213 TP347 seamless tubes Tolerance:


Permitted Variations in Average Wall Thickness for Hot Formed Tubes
Tolerance in %, from specified
NPS [DN] Designator Over Under
1⁄8 to 21⁄2 [6 to 65] incl, all t/D ratiosA 20 12.5
Above 21⁄2 [65], t/D # 5 %A 22.5 12.5
Above 21⁄2 [65], t/D > 5 %A 15 12.5
A t = specified wall thickness D = specified outside diameter




SA213 TP347 seamless tubes Chemical Composition

Chemical Composition % Austenitic and Ferritic Stainless Seamless tube
Grade UNS C Mn P S Si Cr
SA213 TP347 S34700 0.08 2.0 0.045 0.030 1 17-20
Ni Mo N Ni Ti
9-13  10*c-1.1




SA213 TP347 seamless tubes Property:


Tensile and Hardness Requirements  SA213 TP347 Seamless pipes
Grade UNS Tensile Yield Elongation Hardness
SA213 TP347 S34700 min min mikn HBW HRB Max
515 205 35
192 90



SA213 TP347 Equal grade:

You can use the A213 TP347 or SA312 TP347 or A312 TP347 Seamless pipes


SA213 TP347 seamless tubes Delivery time: 20days.

If you have purchase requirement at SA213 TP347 seamless tubes, please feel free to contact us by email.